Product Description

Especially developed for indication and

supervision of the single-phase circuit, replaces

an analogical ammeter, reducing installation

manpower and optimizing the used one of

spaces in the panel.

Ideal for protection of single-phase networks is

monitored and generally to own alarm superior

and inferior. Protection of the parameters of

programming by password.

Specifications

Current s (TRMS) Communication (Option)

CT primary *0 **0 A Link RS**5

CT secondary 1 and 5 A Type 2 ... 3 wires half duplex

Sampling Rate 2 per sec Protocol Modbus RTU mode

Resolution 0.**1 to 1, depending on the range MODBUS speed ***0/***0bauds

Burden < 0.5VA, < 0.2VA in *0A Analog Outputs (Option)

Auxiliary power supply Number of outputs 1 channel

AC voltage DC/AC *5~**5 ± *0 % Type Isolated

Frequency *0 / *0 Hz Range 0 / 4 ... *0 mA or **5V

Consumption < *0 VA Maximum current *0 mA

Front panel Alarm Outputs (Option)

Display Type Red LED Super Bright Display Number of relays 1 channel

Maximum Display ***9 Counts Type Passive nodes

Polarity Indication "-" is indicated for negative (option) Weight

Case / Housing Material Approximate **0~**0g

Installation Panel mounting Environment

Terminal Block Thermoplastic with Tin Plated Brass Terminal Calibration *7°C ± 5°C

Dielectric Strength Operation 0 to *0°C, RH < *0%

2.5 kV at *0Hz for 1 min Storage **0 to *0°C, RH < *0%